1980 Peugeot 604 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Peugeot 604.

1980 Peugeot 604 tire sizes

190/65R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1977 – 1987 Europe market 3 trims

79 hp · I4 175x R14 88H 2 fitments

GenerationI 1977–1987

Power79 hp

EngineI4, Diesel

Center bore63.5 mm

PCD4x140

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88H	14x5.5 ET25 ~~4x140~~	28	Tires Rims
190/65 R15 89H	15x6 ET19 ~~4x140~~	30	Tires Rims

135 hp · V6 175x R14 88H 2 fitments

GenerationI 1977–1987

Power135 hp

EngineV6, Petrol

Center bore63.5 mm

PCD4x140

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88H	14x5.5 ET25 ~~4x140~~	28	Tires Rims
190/65 R15 89H	15x6 ET19 ~~4x140~~	30	Tires Rims

135 hp · V6 175x R14 88H 2 fitments

GenerationI 1977–1987

Power135 hp

EngineV6, Petrol

Center bore63.5 mm

PCD4x140

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88H	14x5.5 ET25 ~~4x140~~	26	Tires Rims
190/65 R15 89H	15x6 ET20 ~~4x140~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.