Skip to content

2008 Peugeot Expert tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Peugeot Expert.

2008 Peugeot Expert tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Peugeot Expert II

2007 – 2016 Europe market 4 trims

Expert 1.6HDi

89 hp · 1.6L I4 215/65 R15 104R 3 fitments
GenerationII 2007–2016
Power89 hp
Engine1.6L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 104R15x6.5 ET38 5x1083.4TiresRims
215/60 R16 104R16x7 ET42 5x1083.4TiresRims
215/55 R17 103T17x7 ET40 5x10841TiresRims

Expert 2.0HDi

118 hp · 2.0L I4 215/60 R16 104T 3 fitments
GenerationII 2007–2016
Power118 hp
Engine2.0L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 104T16x7 ET39 5x1083.4TiresRims
215/60 R16 104T16x7 ET42 5x1083.4TiresRims
225/55 R17 104H17x7 ET40 5x10841TiresRims

Expert 2.0HDi

161 hp · 2.0L I4 215/60 R16 104T 3 fitments
GenerationII 2007–2016
Power161 hp
Engine2.0L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 104T16x7 ET39 5x1083.4TiresRims
215/60 R16 104T16x7 ET42 5x1083.4TiresRims
225/55 R17 104H17x7 ET40 5x10841TiresRims

Expert 2.0i

138 hp · I4 215/60 R16 104T 3 fitments
GenerationII 2007–2016
Power138 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 104T16x7 ET39 5x1083.4TiresRims
215/60 R16 104R16x7 ET42 5x1083.4TiresRims
235/50 R1717x7.5 ET38 5x10841TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.