2010 Peugeot Hoggar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Peugeot Hoggar.

2010 Peugeot Hoggar tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2015 Latin America market 2 trims

79 hp · I4 Flex-Fuel 175/65 HR14 3 fitments

GenerationI 2010–2015

Power79 hp

EngineI4 Flex-Fuel

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 HR14	14x5.5 ET34 ~~4x108~~	32	Tires Rims
185/55 HR15	15x6 ET35 ~~4x108~~	32	Tires Rims
195/50 HR16	16x6.5 ET32 ~~4x108~~	35	Tires Rims

109 hp · I4 Flex-Fuel 175/65 HR14 3 fitments

GenerationI 2010–2015

Power109 hp

EngineI4 Flex-Fuel

Center bore65.1 mm

PCD4x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 HR14	14x5.5 ET34 ~~4x108~~	32	Tires Rims
195/55 HR15	15x6.5 ET32 ~~4x108~~	35	Tires Rims
205/45 HR16	16x7 ET27 ~~4x108~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.