1984 Plymouth Colt tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Plymouth Colt.

1984 Plymouth Colt tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1984 – 1988 USA market 3 trims

82 hp · G15B I4 145/80 R13 77S 5 fitments

GenerationV 1984–1988

Power82 hp

EngineG15B I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/80 R13 77S	13x4.5 ET46 ~~4x114.3~~	29	Tires Rims
155/80 R13 79S	13x4.5 ET46 ~~4x114.3~~	29	Tires Rims
175/70 R13 82S	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
175/65 R14 82H	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/60 R14 82H	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims

123 hp · 4G32T I4 175/70 R13 82S 5 fitments

GenerationV 1984–1988

Power123 hp

Engine4G32T I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
175/65 R14 82H	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/60 R14 82H	14x5.5 ET46 ~~4x114.3~~	30	Tires Rims
185/55 R15 82H	15x6 ET42 ~~4x114.3~~	30	Tires Rims
195/45 R16 82H	16x6 ET42 ~~4x114.3~~	30	Tires Rims

99 hp · 4G37 I4 155/80 R13 79S 5 fitments

GenerationV 1984–1988

Power99 hp

Engine4G37 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R13 79S	13x4.5 ET46 ~~4x114.3~~	29	Tires Rims
175/70 R13 82S	13x5.5 ET46 ~~4x114.3~~	29	Tires Rims
175/65 R14 82H	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
185/60 R14 82H	14x5.5 ET46 ~~4x114.3~~	30	Tires Rims
185/55 R15 82H	15x6 ET42 ~~4x114.3~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.