Skip to content

1994 Plymouth Colt tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Plymouth Colt.

Bolt pattern
Fitment tables

2 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Plymouth Colt Vll

1993 – 1994 USA market 2 trims

Colt 1.5

93 hp · 4G15 I4 145/80 R13 77S 5 fitments
GenerationVll 1993–1994
Power93 hp
Engine4G15 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 77S13x4.5 ET46 4x10028TiresRims
155/80 R13 89S13x4.5 ET46 4x10028TiresRims
175/70 R13 82S13x5.5 ET46 4x10029TiresRims
175/65 R14 82H14x5.5 ET46 4x10029TiresRims
185/60 R14 82H14x5.5 ET46 4x10029TiresRims

Colt 1.8

113 hp · 4G63 I4 155/80 R13 79S 5 fitments
GenerationVll 1993–1994
Power113 hp
Engine4G63 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 79S13x4.5 ET46 4x10028TiresRims
175/70 R13 82S13x5.5 ET46 4x10029TiresRims
175/65 R14 82H14x5.5 ET46 4x10029TiresRims
185/60 R14 82H14x5.5 ET46 4x10029TiresRims
185/55 R15 82H15x6 ET42 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.