1981 Plymouth Horizon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Plymouth Horizon.

1981 Plymouth Horizon tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1978 – 1990 USA market 2 trims

70 hp · I4 155x R13 81Q 4 fitments

GenerationL-body 1978–1990

Power70 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13 81Q	13x5 ET39 ~~4x100~~	26	Tires Rims
165/80 R13 81Q	13x5 ET45 ~~4x100~~	26	Tires Rims
175/70 R14 79S	14x5.5 ET45 ~~4x100~~	28	Tires Rims
185/65 R14 79T	14x5.5 ET45 ~~4x100~~	29	Tires Rims

84 hp · I4 165/80 R13 81S 4 fitments

GenerationL-body 1978–1990

Power84 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13 81S	13x5 ET45 ~~4x100~~	26	Tires Rims
185/70 R13 82S	13x5.5 ET45 ~~4x100~~	29	Tires Rims
185/65 R14 85S	14x5.5 ET45 ~~4x100~~	29	Tires Rims
195/55 R15 85H	15x6 ET42 ~~4x100~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.