1987 Plymouth Reliant tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Plymouth Reliant.

1987 Plymouth Reliant tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1989 USA market 2 trims

93 hp · I4 175/80 R13 89S 4 fitments

GenerationK-body Facelift 1986–1989

Power93 hp

EngineI4, Petrol

Center bore57.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/80 R13 89S	13x5 ET37 ~~5x100~~	26	Tires Rims
185/70 R14 89S	14x5.5 ET40 ~~5x100~~	29	Tires Rims
185/65 R15 88S	15x5.5 ET40 ~~5x100~~	29	Tires Rims
185/65 R15 88S	15x6 ET40 ~~5x100~~	29	Tires Rims

101 hp · I4 185/70 R14 88S 4 fitments

GenerationK-body Facelift 1986–1989

Power101 hp

EngineI4, Petrol

Center bore57.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET40 ~~5x100~~	29	Tires Rims
185/65 R15 88S	15x5.5 ET40 ~~5x100~~	29	Tires Rims
185/65 R15 88S	15x6 ET40 ~~5x100~~	29	Tires Rims
195/60 R15 89T	15x6 ET40 ~~5x100~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.