Skip to content

2024 Polestar Polestar 4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Polestar Polestar 4.

2024 Polestar Polestar 4 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Polestar Polestar 4 P417

2024 – 2027 2 trims

Polestar 4 Long range Dual motor (SUV, 5d)

536 hp · Electric 255/50 ZR20 3 fitments
GenerationP417 2024–2027
MarketUSA
Power536 hp
EngineElectric, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/50 ZR2020x8.5 ET47 5x10838TiresRims
OE255/45 ZR2121x9.5 ET45 5x10838TiresRims
Alt265/40 ZR2222x9.5 ET48 5x10838TiresRims

Polestar 4 Long range Single motor (SUV, 5d)

268 hp · Electric 255/50 ZR20 3 fitments
GenerationP417 2024–2027
MarketUSA
Power268 hp
EngineElectric, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/50 ZR2020x8.5 ET47 5x10838TiresRims
Alt255/45 ZR2121x9.5 ET45 5x10838TiresRims
Alt265/40 ZR2222x9.5 ET48 5x10838TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.