Skip to content
tirewheelguide.com

1988 Pontiac 6000 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Pontiac 6000.

1988 Pontiac 6000 tire sizes

195/70RS14195/65RH15205/55RV16205/60RH15185/75RS14205/65RS14205/60RS15
Bolt pattern
Other years
19841985198619871988198919901991 All 1982–1991
Fitment tables

3 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear.

Pontiac 6000 A-body

1982 – 1991 USA market 3 trims

6000 2.5

90 hp · I4 185x SR13 4 fitments
GenerationA-body 1982–1991
Power90 hp
EngineI4, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x SR1313x5.5 ET39 5x11529TiresRims
185/75 SR1414x5.5 ET39 5x11530TiresRims
195/70 SR1414x5.5 ET39 5x11530TiresRims
195/65 HR1515x6 ET42 5x11530TiresRims

6000 2.8i

130 hp · V6 195/70 SR14 4 fitments
GenerationA-body 1982–1991
Power130 hp
EngineV6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 SR1414x5.5 ET39 5x11530TiresRims
195/65 HR1515x6 ET42 5x11530TiresRims
205/60 SR1515x6 ET42 5x11530TiresRims
205/55 VR1616x6.5 ET40 5x11533TiresRims

6000 3.1i

135 hp · V6 195/70 SR14 4 fitments
GenerationA-body 1982–1991
Power135 hp
EngineV6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 SR1414x5.5 ET39 5x11529TiresRims
205/65 SR1414x6 ET42 5x11530TiresRims
205/60 HR1515x6 ET42 5x11530TiresRims
205/55 VR1616x6.5 ET40 5x11533TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading