2004 Pontiac Aztek tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Pontiac Aztek.

2004 Pontiac Aztek tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2005 USA market 1 trim

185 hp · V6 215/65 R16 96S 4 fitments

GenerationU-body 2001–2005

Power185 hp

EngineV6, Petrol

Center bore70.3 mm

PCD5x115

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R16 96S	16x6.5 ET52 ~~5x115~~	35	Tires Rims
225/60 R17 97H	17x6.5 ET52 ~~5x115~~	35	Tires Rims
215/70 R16 97S	16x6.5 ET50 ~~5x115~~	35	Tires Rims
235/55 R17 98V	17x7 ET50 ~~5x115~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.