Skip to content

1987 Pontiac Grand Am tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Pontiac Grand Am.

1987 Pontiac Grand Am tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Pontiac Grand Am N-body

1985 – 1991 USA market 3 trims

Grand Am 2.0T

165 hp · I4 215/60 HR14 3 fitments
GenerationN-body 1985–1991
Power165 hp
EngineI4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 HR1414x6 ET42 5x10030TiresRims
205/60 HR1515x6 ET42 5x10030TiresRims
215/50 VR1616x6.5 ET40 5x10033TiresRims

Grand Am 2.5i

98 hp · I4 185/80 SR13 3 fitments
GenerationN-body 1985–1991
Power98 hp
EngineI4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/80 SR1313x5.5 ET38 5x100–TiresRims
205/70 SR1313x5.5 ET42 5x100–TiresRims
215/60 HR1414x6 ET42 5x100–TiresRims

Grand Am 3.0i

125 hp · V6 205/70 SR13 3 fitments
GenerationN-body 1985–1991
Power125 hp
EngineV6, Petrol
Center bore57.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 SR1313x5.5 ET42 5x10029TiresRims
215/60 HR1414x6 ET42 5x10032TiresRims
205/60 HR1515x6 ET42 5x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.