Skip to content

1972 Pontiac Grand Ville tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1972 Pontiac Grand Ville.

1972 Pontiac Grand Ville tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1972

Open a trim for its factory package and every alternative size, front and rear.

Pontiac Grand Ville P49

1971 – 1975 USA market 2 trims

Grand Ville 6.6

N/A · V8 215/75 SR15 3 fitments
GenerationP49 1971–1975
PowerN/A
EngineV8, Petrol
Center bore78.1 mm
PCD5x127
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x6 ET0 5x127–TiresRims
225/75 SR1515x6.5 ET0 5x127–TiresRims
235/70 SR1515x7 ET0 5x127–TiresRims

Grand Ville 7.5

N/A · V8 215/75 SR15 3 fitments
GenerationP49 1971–1975
PowerN/A
EngineV8, Petrol
Center bore78.1 mm
PCD5x127
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x6 ET0 5x127–TiresRims
225/75 SR1515x6.5 ET0 5x127–TiresRims
235/70 SR1515x7 ET0 5x127–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.