Skip to content

2008 Pontiac Vibe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Pontiac Vibe.

2008 Pontiac Vibe tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Pontiac Vibe ZZE

2002 – 2008 USA market 3 trims

Vibe 1.8i

130 hp · I4 205/55 R16 91V 3 fitments
GenerationZZE 2002–2008
Power130 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x6.5 ET39 5x10032TiresRims
215/50 R17 89V17x7 ET45 5x10032TiresRims
225/45 R17 89V17x7.5 ET42 5x10033TiresRims

Vibe 1.8i AWD

123 hp · I4 205/55 R16 91V 3 fitments
GenerationZZE 2002–2008
Power123 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x6.5 ET39 5x1002.2TiresRims
215/50 R17 89V17x7 ET45 5x1002.2TiresRims
225/45 R17 89V17x7.5 ET42 5x1002.3TiresRims

Vibe 1.8i GT

180 hp · I4 215/50 R17 89V 3 fitments
GenerationZZE 2002–2008
Power180 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R17 89V17x7 ET45 5x10032TiresRims
225/45 R17 89V17x7.5 ET42 5x10033TiresRims
235/40 ZR18 89W18x8 ET38 5x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.