Skip to content

1990 Porsche 911 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Porsche 911.

Fitment tables

4 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear.

Porsche 911 IV (964)

1989 – 1994 Europe market 4 trims

911 3.3 Turbo

315 hp · M 30.69 F6 205/50 R17 / 225/45 R17 4 fitments
GenerationIV (964) 1989–1994
Power315 hp
EngineM 30.69 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/50 R1717x7 ET55 5x130–TiresRims
Rear225/45 R1717x8 ET52 5x130–TiresRims
Front205/50 ZR1717x7 ET55 5x130–TiresRims
Rear255/40 ZR1717x9 ET55 5x130–TiresRims
Front205/50 ZR1717x7 ET55 5x130–TiresRims
Rear255/40 ZR1717x9.5 ET68 5x130–TiresRims
Front205/45 ZR1818x7 ET55 5x130–TiresRims
Rear265/35 ZR1818x9.5 ET65 5x130–TiresRims

911 3.6 Carrera 2

247 hp · M 64.01 M 64.02 F6 205/55 ZR16 / 225/50 ZR16 4 fitments
GenerationIV (964) 1989–1994
Power247 hp
EngineM 64.01 M 64.02 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 ZR1616x6 ET52.3 5x130–TiresRims
Rear225/50 ZR1616x7 ET55 5x130–TiresRims
Front205/55 ZR1616x6 ET52.3 5x130–TiresRims
Rear225/50 ZR1616x8 ET52.3 5x130–TiresRims
Front205/50 ZR1717x7 ET55 5x130–TiresRims
Rear225/45 ZR1717x8 ET52 5x130–TiresRims
Front205/50 ZR1717x7 ET55 5x130–TiresRims
Rear255/40 ZR1717x8 ET52 5x130–TiresRims

911 3.6 Carrera 4

247 hp · M 64.01 M 64.02 F6 205/55 ZR16 4 fitments
GenerationIV (964) 1989–1994
Power247 hp
EngineM 64.01 M 64.02 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 ZR1616x7 ET55 5x130–TiresRims
205/55 ZR1616x8 ET52.3 5x130–TiresRims
205/50 ZR1717x8 ET52 5x130–TiresRims
205/50 ZR1717x8 ET52 5x130–TiresRims

911 3.6 Speedster

247 hp · M 64.01 M 64.02 F6 205/50 ZR16 4 fitments
GenerationIV (964) 1989–1994
Power247 hp
EngineM 64.01 M 64.02 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 ZR1616x7 ET55 5x130–TiresRims
205/55 ZR1616x8 ET52.3 5x130–TiresRims
205/50 ZR1717x8 ET52 5x130–TiresRims
205/50 ZR1717x8 ET52 5x130–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.