1987 Porsche 924 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Porsche 924.

1987 Porsche 924 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1976 – 1988 1 trim

148 hp · 2.5 L M44.07/08 I4 Petrol 2.5 L M44.07/08 I4 195/65 VR15 4 fitments

Generation924 1976–1988

MarketUSA

Power148 hp

Engine2.5 L M44.07/08 I4 Petrol 2.5 L M44.07/08 I4, Petrol

Center bore71.6 mm

PCD5x130

ThreadM14 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	195/65 VR15	15x6 ET52 ~~5x130~~	29 F / 36 R	Tires Rims
Alt	195/65 VR15	15x7 ET52 ~~5x130~~	29 F / 36 R	Tires Rims
Alt	205/55 VR16	16x6 ET52 ~~5x130~~	29 F / 36 R	Tires Rims
Alt	Front205/55 VR16	16x7 ET52 ~~5x130~~	29	Tires Rims
	Rear225/50 VR16	16x8 ET52 ~~5x130~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.