Skip to content
tirewheelguide.com

1992 Porsche 928 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Porsche 928.

1992 Porsche 928 tire sizes

225/50RV16225/45R17255/40R17245/45RV16205/55RS16225/50RS16
Bolt pattern
Other years
19881989199019911992199319941995 All 1977–1995
Fitment tables

3 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Porsche 928 I

1977 – 1995 Europe market 3 trims

928 5.0 GT

326 hp · M28 V8 225/50 VR16 / 245/45 VR16 3 fitments
GenerationI 1977–1995
Power326 hp
EngineM28 V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 VR1616x8 ET60 5x13036TiresRims
Rear245/45 VR1616x9 ET43 5x13044TiresRims
Front225/45 ZR1717x8 ET60 5x13036TiresRims
Rear255/40 ZR1717x9 ET43 5x13044TiresRims
225/50 SR1616x7 ET65 5x1303TiresRims

928 5.0 GTS

345 hp · M28 V8 225/50 VR16 / 245/45 VR16 2 fitments
GenerationI 1977–1995
Power345 hp
EngineM28 V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 VR1616x8 ET60 5x13036TiresRims
Rear245/45 VR1616x9 ET43 5x13044TiresRims
Front225/45 ZR1717x8 ET60 5x13036TiresRims
Rear255/40 ZR1717x9 ET43 5x13044TiresRims

928 5.0 S4

315 hp · M28 V8 205/55 SR16 3 fitments
GenerationI 1977–1995
Power315 hp
EngineM28 V8, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 SR1616x7 ET65 5x1303TiresRims
225/50 VR1616x8 ET52.3 5x1303TiresRims
225/50 VR1616x9 ET43 5x1303TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading