Skip to content

2004 Porsche Boxster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Porsche Boxster.

Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Porsche Boxster I (986)

1996 – 2004 Europe market 2 trims

Boxster 2.7

225 hp · 2.7L M 96/22 F6 205/55 R16 89W / 225/50 R16 92W 6 fitments
GenerationI (986) 1996–2004
Power225 hp
Engine2.7L M 96/22 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 R16 89W16x6 ET50 5x13029TiresRims
Rear225/50 R16 92W16x7 ET40 5x13036TiresRims
Front205/55 R16 89T16x6 ET50 5x13029TiresRims
Rear225/50 R16 92T16x7 ET40 5x13036TiresRims
Front205/50 R17 89W17x7 ET55 5x13029TiresRims
Rear255/40 R17 90W17x8.5 ET50 5x13036TiresRims
Front205/50 R17 89T17x7 ET55 5x13029TiresRims
Rear255/40 R17 90T17x8.5 ET50 5x13036TiresRims
Front205/50 R17 89T17x7 ET55 5x13029TiresRims
Rear255/40 R17 94T17x8.5 ET50 5x13036TiresRims
Front225/40 R18 88W18x7.5 ET50 5x13029TiresRims
Rear265/35 R18 93W18x9 ET52 5x13036TiresRims

Boxster 3.2 S

263 hp · 3.2L M 96/21 F6 205/50 R17 89W / 255/40 R17 90W 6 fitments
GenerationI (986) 1996–2004
Power263 hp
Engine3.2L M 96/21 F6, Petrol
Center bore71.6 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/50 R17 89W17x7 ET55 5x13029TiresRims
Rear255/40 R17 90W17x8.5 ET50 5x13036TiresRims
Front205/50 R17 89T17x7 ET55 5x13029TiresRims
Rear255/40 R17 90T17x8.5 ET50 5x13036TiresRims
Front205/50 R17 89T17x7 ET55 5x13029TiresRims
Rear255/40 R17 94T17x8.5 ET50 5x13036TiresRims
Front225/45 R17 91W17x7.5 ET50 5x13029TiresRims
Rear255/40 R17 94W17x8.5 ET50 5x13036TiresRims
Front225/40 R18 88W18x8 ET50 5x13029TiresRims
Rear265/35 R18 93W18x9 ET52 5x13036TiresRims
Front225/40 ZR18 88Y18x8 ET45 5x13029TiresRims
Rear295/30 ZR18 94Y18x10 ET45 5x13036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.