Skip to content

2002 Proton Compact tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Proton Compact.

Bolt pattern
Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Proton Compact I

1996 – 2005 3 trims

Compact 1.3

72 hp · 1.3L 4G13 I4 175/70 R13 82H 3 fitments
GenerationI 1996–2005
Power72 hp
Engine1.3L 4G13 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R13 82H13x5 ET37 4x10029TiresRims
185/65 R13 82H13x5.5 ET40 4x10029TiresRims
185/60 R14 82H14x5.5 ET40 4x10029TiresRims

Compact 1.5

91 hp · 1.5L 4G15 I4 185/60 R14 82H 3 fitments
GenerationI 1996–2005
Power91 hp
Engine1.5L 4G15 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET40 4x10029TiresRims
185/55 R15 82H15x6 ET42 4x10029TiresRims
195/45 R16 82V16x6.5 ET46 4x10030TiresRims

Compact 1.6i

109 hp · 1.6L 4G92 I4 185/60 R14 82H 3 fitments
GenerationI 1996–2005
Power109 hp
Engine1.6L 4G92 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET40 4x10029TiresRims
195/50 R15 82H15x6 ET42 4x10029TiresRims
205/45 R16 82V16x6.5 ET46 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.