Skip to content

2006 Proton Gen-2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Proton Gen-2.

2006 Proton Gen-2 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Proton Gen-2 Gen-2

2004 – 2014 Southeast Asia market 3 trims

Gen-2 1.3i

94 hp · 1.3L CamPro S4PE I4 195/55 R15 86H 3 fitments
GenerationGen-2 2004–2014
MarketSoutheast Asia
Power94 hp
Engine1.3L CamPro S4PE I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 86H15x6 ET46 4x114.3–TiresRims
195/60 R15 88H15x6 ET46 4x114.3–TiresRims
195/50 R16 88H16x6 ET46 4x114.3–TiresRims

Gen-2 1.5i

99 hp · 1.5L 4G15 I4 195/55 R15 86H 3 fitments
GenerationGen-2 2004–2014
MarketChina
Power99 hp
Engine1.5L 4G15 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 86H15x6 ET46 4x114.3–TiresRims
195/60 R15 88H15x6 ET46 4x114.3–TiresRims
205/50 R16 87V16x6.5 ET46 4x114.3–TiresRims

Gen-2 1.6i

110 hp · 1.6L CamPro S4PH CamPro IAFM I4 195/55 R15 86H 3 fitments
GenerationGen-2 2004–2014
MarketSoutheast Asia
Power110 hp
Engine1.6L CamPro S4PH CamPro IAFM I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 86H15x6 ET46 4x114.3–TiresRims
195/60 R15 88H15x6 ET46 4x114.3–TiresRims
205/50 R16 87V16x6.5 ET46 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.