2014 Proton Gen-2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Proton Gen-2.

2014 Proton Gen-2 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2014 Southeast Asia market 2 trims

94 hp · 1.3L CamPro S4PE I4 195/55 R15 86H 3 fitments

GenerationGen-2 2004–2014

Power94 hp

Engine1.3L CamPro S4PE I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/55 R15 86H	15x6 ET46 ~~4x114.3~~	–	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	–	Tires Rims
195/50 R16 88H	16x6 ET46 ~~4x114.3~~	–	Tires Rims

110 hp · 1.6L CamPro S4PH CamPro IAFM I4 195/55 R15 86H 3 fitments

GenerationGen-2 2004–2014

Power110 hp

Engine1.6L CamPro S4PH CamPro IAFM I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/55 R15 86H	15x6 ET46 ~~4x114.3~~	–	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	–	Tires Rims
205/50 R16 87V	16x6.5 ET46 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.