Skip to content

2026 Proton Iriz tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Proton Iriz.

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Proton Iriz I Facelift

2021 – 2027 2 trims

Iriz 1.3i

94 hp · 1.3 L S4PE I4 Petrol 1.3 L S4PE I4 185/55 R15 3 fitments
GenerationI Facelift 2021–2027
MarketSoutheast Asia
Power94 hp
Engine1.3 L S4PE I4 Petrol 1.3 L S4PE I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/55 R1515x6 ET46 4x114.330TiresRims
Alt175/65 R1414x5.5 ET46 4x114.329TiresRims
Alt195/45 R1616x6 ET46 4x114.330TiresRims

Iriz 1.6i

107 hp · 1.6 L S4PH I4 Petrol 1.6 L S4PH I4 185/55 R16 3 fitments
GenerationI Facelift 2021–2027
MarketSoutheast Asia
Power107 hp
Engine1.6 L S4PH I4 Petrol 1.6 L S4PH I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/55 R1616x6.5 ET46 4x114.330TiresRims
Alt195/50 R1616x6.5 ET46 4x114.330TiresRims
Alt195/45 R1717x6.5 ET46 4x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.