Skip to content

2000 Proton Perdana tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Proton Perdana.

Fitment tables

2 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Proton Perdana I

1995 – 2010 Southeast Asia market 2 trims

Perdana 2.0i

148 hp · 2.0L 6A12 V6 205/55 R16 92H 5 fitments
GenerationI 1995–2010
Power148 hp
Engine2.0L 6A12 V6, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 92H16x6.5 ET45 4x114.32.1TiresRims
225/50 R16 92H16x7.5 ET45 4x114.32.1TiresRims
205/50 R17 92H17x6.5 ET45 4x114.32.1TiresRims
225/45 R17 91V17x7.5 ET45 4x114.330TiresRims
235/35 R18 91V18x8 ET42 4x114.330TiresRims

Perdana 2.0i

133 hp · 4G63 I4 205/60 R15 92H 5 fitments
GenerationI 1995–2010
Power133 hp
Engine4G63 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 92H15x6.5 ET45 4x114.32.1TiresRims
205/55 R16 92H16x6.5 ET45 4x114.32.1TiresRims
215/50 R16 92H16x7 ET48 4x114.32.1TiresRims
215/45 R17 91V17x7 ET48 4x114.330TiresRims
225/40 R18 91V18x7.5 ET45 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.