Skip to content

2020 Proton Perdana tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Proton Perdana.

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Proton Perdana II Facelift

2016 – 2021 Southeast Asia market 2 trims

Perdana 2.0i

154 hp · 2.0L R20A3 I4 225/50 R17 94V 4 fitments
GenerationII Facelift 2016–2021
Power154 hp
Engine2.0L R20A3 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 94V17x7.5 ET55 5x114.333TiresRims
235/50 R17 96V17x7.5 ET55 5x114.333TiresRims
225/45 R18 92V18x7.5 ET55 5x114.335TiresRims
235/45 R18 94V18x8 ET55 5x114.335TiresRims

Perdana 2.4i

178 hp · 2.4L K24Z2 I4 225/50 R17 94V 4 fitments
GenerationII Facelift 2016–2021
Power178 hp
Engine2.4L K24Z2 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 94V17x7.5 ET55 5x114.333TiresRims
235/45 R18 94V18x8 ET55 5x114.335TiresRims
235/40 R19 92W19x8 ET55 5x114.336TiresRims
245/35 R19 93W19x8.5 ET48 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.