2013 Proton Suprima S tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Proton Suprima S.

2013 Proton Suprima S tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2013 – 2019 1 trim

138 hp · 1.6L CamPro CFE I4 205/55 R16 89V 4 fitments

GenerationP3-21A 2013–2019

Power138 hp

Engine1.6L CamPro CFE I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16 89V	16x6.5 ET46 ~~5x114.3~~	2.1	Tires Rims
215/45 R17 87V	17x7 ET46 ~~5x114.3~~	2.1	Tires Rims
225/45 R17 89V	17x7.5 ET46 ~~5x114.3~~	2.1	Tires Rims
225/40 R18 89V	18x7.5 ET42 ~~5x114.3~~	2.1	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.