Skip to content

2025 Proton X50 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Proton X50.

2025 Proton X50 tire sizes

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Proton X50 I Facelift

2025 – 2027 1 trim

X50 1.5T (SUV, 5d)

178 hp · 1.5 L BHE-15TD I4 Petrol 1.5 L BHE-15TD I4 215/60 R17 2 fitments
GenerationI Facelift 2025–2027
MarketSoutheast Asia
Power178 hp
Engine1.5 L BHE-15TD I4 Petrol 1.5 L BHE-15TD I4, Petrol
Center bore54.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/60 R1717x6.5 ET45 5x114.333TiresRims
OE215/55 R1818x7 ET53 5x114.333TiresRims

Proton X50 I

2020 – 2025 2 trims

X50 1.5T (SUV, 5d)

148 hp · 1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3 215/60 R17 2 fitments
GenerationI 2020–2025
MarketSoutheast Asia
Power148 hp
Engine1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3, Petrol
Center bore54.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/60 R1717x6.5 ET45 5x114.332TiresRims
OE215/55 R1818x7 ET53 5x114.332TiresRims

X50 1.5TGDI (SUV, 5d)

174 hp · 1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3 215/55 R18 2 fitments
GenerationI 2020–2025
MarketSoutheast Asia
Power174 hp
Engine1.5 L JLH-3G15TD I3 Petrol 1.5 L JLH-3G15TD I3, Petrol
Center bore54.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1818x7 ET53 5x114.332TiresRims
Alt215/60 R1717x6.5 ET45 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.