Skip to content

2024 Ram 1000 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Ram 1000.

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Ram 1000 1000

2018 – 2024 2 trims

1000 1.8 E.torQ

128 hp · 1.8 L I4 Petrol 1.8 L I4 215/65 R16 4 fitments
Generation1000 2018–2024
MarketLatin America
Power128 hp
Engine1.8 L I4 Petrol 1.8 L I4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1616x6.5 ET40 5x11032TiresRims
OE215/65 R1616x6.5 ET40 5x11032TiresRims
Alt215/60 R1717x6.5 ET40 5x11032TiresRims
Alt225/60 R1717x6.5 ET40 5x11032TiresRims

1000 2.0 MultiJet

168 hp · 2.0 L I4 Diesel 2.0 L I4 225/65 R17 3 fitments
Generation1000 2018–2024
MarketLatin America
Power168 hp
Engine2.0 L I4 Diesel 2.0 L I4, Diesel
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/65 R1717x6.5 ET40 5x11032TiresRims
OE225/60 R1818x6.5 ET40 5x11032TiresRims
Alt225/70 R1616x6.5 ET40 5x11032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.