Skip to content

2011 Ram Dakota tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Ram Dakota.

Bolt pattern
Fitment tables

2 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Ram Dakota Dakota

2011 – 2012 2 trims

Dakota 3.7 Magnum

210 hp · 3.7 L V6 Petrol 3.7 L V6 245/70 R16 5 fitments
GenerationDakota 2011–2012
MarketUSA
Power210 hp
Engine3.7 L V6 Petrol 3.7 L V6, Petrol
Center bore77.8 mm
PCD5x139.7
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x7 ET25 5x139.735TiresRims
OE245/70 R1616x8 ET25 5x139.735TiresRims
OE265/70 R1616x8 ET25 5x139.735TiresRims
OE265/65 R1717x8 ET25 5x139.735TiresRims
Alt265/60 R1818x8 ET25 5x139.735TiresRims

Dakota 4.7 Magnum

302 hp · 4.7 L V8 Petrol + E85 4.7 L V8 Petrol + E85 265/65 R17 3 fitments
GenerationDakota 2011–2012
MarketUSA
Power302 hp
Engine4.7 L V8 Petrol + E85 4.7 L V8 Petrol + E85
Center bore77.8 mm
PCD5x139.7
FitTire sizeRim size and bolt patternPressure, psiPrices
OE265/65 R1717x8 ET25 5x139.735TiresRims
OE265/60 R1818x8 ET25 5x139.735TiresRims
Alt265/55 R1919x8.5 ET20 5x139.735TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.