Skip to content

2019 Ram V1000 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Ram V1000.

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Ram V1000 V1000

2016 – 2025 2 trims

V1000 1.3 MultiJet

89 hp · 1.3L 263A2000 I4 185/65 R15 92T 6 fitments
GenerationV1000 2016–2025
Power89 hp
Engine1.3L 263A2000 I4, Diesel
Center bore58.1 mm
PCD5x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 92T15x6 ET39 5x9836TiresRims
195/65 R15 95T15x6 ET39 5x9835TiresRims
195/60 R16 99T16x6 ET36.5 5x9839TiresRims
215/55 R16 97H16x6.5 ET33.5 5x982.9TiresRims
205/55 R16 97T16x6 ET39 5x9836TiresRims
205/55 R17 95H17x6.5 ET39 5x9836TiresRims

V1000 1.6 MultiJet

103 hp · 1.6L 198A3000 I4 195/60 R16 99T 6 fitments
GenerationV1000 2016–2025
Power103 hp
Engine1.6L 198A3000 I4, Diesel
Center bore58.1 mm
PCD5x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R16 99T16x6 ET36.5 5x9839TiresRims
215/55 R16 97H16x6.5 ET33.5 5x982.9TiresRims
185/65 R15 92T15x6 ET39 5x9836TiresRims
195/65 R15 95T15x6 ET39 5x9835TiresRims
205/55 R16 97T16x6 ET39 5x9836TiresRims
205/55 R17 95H17x6.5 ET39 5x9836TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.