Skip to content

2011 Renault Samsung SM7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Renault Samsung SM7.

2011 Renault Samsung SM7 tire sizes

Bolt pattern

2 generations were sold in 2011. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Renault Samsung SM7 II (L47)

2011 – 2014 2 trims

SM7 2.5i

188 hp · 2.5L VQ25 V6 225/50 R17 94V 2 fitments
GenerationII (L47) 2011–2014
Power188 hp
Engine2.5L VQ25 V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 94V17x7.5 ET41 5x114.3–TiresRims
225/45 R18 91W18x7.5 ET40 5x114.3–TiresRims

SM7 3.5i

255 hp · 3.5L 5ZV V6 225/50 R17 94V 2 fitments
GenerationII (L47) 2011–2014
Power255 hp
Engine3.5L 5ZV V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 94V17x7.5 ET41 5x114.3–TiresRims
235/45 R18 94W18x8 ET40 5x114.3–TiresRims

Renault Samsung SM7 I (EX2)

2004 – 2011 2 trims

SM7 2.3i

168 hp · VQ23 V6 205/65 R16 91H 3 fitments
GenerationI (EX2) 2004–2011
Power168 hp
EngineVQ23 V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R16 91H16x6.5 ET50 5x114.332TiresRims
215/60 R1616x7 ET50 5x114.332TiresRims
215/55 R1717x7 ET45 5x114.332TiresRims

SM7 3.5i

215 hp · VQ35 V6 215/55 R17 3 fitments
GenerationI (EX2) 2004–2011
Power215 hp
EngineVQ35 V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R1717x7 ET55 5x114.3–TiresRims
205/65 R16 91H16x6.5 ET50 5x114.332TiresRims
225/45 R1818x7.5 ET50 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.