Skip to content

2020 Renault Samsung XM3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Renault Samsung XM3.

2020 Renault Samsung XM3 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Renault Samsung XM3 XM3

2020 – 2023 South Korea market 2 trims

XM3 1.3 TCe

150 hp · 1.3L H5Ht I4 215/65 R16 98H 3 fitments
GenerationXM3 2020–2023
Power150 hp
Engine1.3L H5Ht I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98H16x6.5 ET50 5x114.3TiresRims
215/60 R17 96H17x6.5 ET50 5x114.3TiresRims
215/55 R18 95H18x7 ET50 5x114.3TiresRims

XM3 1.6 GTe

121 hp · 1.6L H4M I4 215/65 R16 98H 3 fitments
GenerationXM3 2020–2023
Power121 hp
Engine1.6L H4M I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98H16x6.5 ET50 5x114.3TiresRims
215/60 R17 96H17x6.5 ET50 5x114.3TiresRims
215/55 R18 95H18x7 ET50 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.