Skip to content

2026 Renault Austral tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Renault Austral.

2026 Renault Austral tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Renault Austral HHN Facelift

2024 – 2027 2 trims

Austral 1.2 E-Tech FHEV (SUV, 5d)

196 hp · 1.2 L Hybrid 1.2 L 235/55 R18 4 fitments
GenerationHHN Facelift 2024–2027
MarketEurope
Power196 hp
Engine1.2 L Hybrid 1.2 L, Hybrid
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1818x7.5 ET45 5x114.3–TiresRims
Alt205/55 R1919x7 ET32 5x114.3–TiresRims
Alt235/50 R1919x7.5 ET40 5x114.3–TiresRims
Alt235/45 R2020x8 ET40 5x114.3–TiresRims

Austral 1.3 TCe mHEV (SUV, 5d)

146 hp · 1.3 L Petrol 1.3 L 235/55 R18 4 fitments
GenerationHHN Facelift 2024–2027
MarketEurope
Power146 hp
Engine1.3 L Petrol 1.3 L, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1818x7.5 ET45 5x114.3–TiresRims
Alt205/55 R1919x7 ET32 5x114.3–TiresRims
Alt235/50 R1919x7.5 ET40 5x114.3–TiresRims
Alt235/45 R2020x8 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.