Skip to content

2016 Renault Captur tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Renault Captur.

2016 Renault Captur tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Renault Captur I (J87)

2013 – 2020 Europe market 4 trims

Captur 0.9 TCe

89 hp · H4B I3 195/65 R15 95H 3 fitments
GenerationI (J87) 2013–2020
MarketEurope
Power89 hp
EngineH4B I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 95H15x5.5 ET40 4x1002.1TiresRims
205/60 R16 92H16x6.5 ET40 4x1002.1TiresRims
205/55 R17 91V17x6.5 ET40 4x1002.1TiresRims

Captur 1.5 dCi

89 hp · K9K I4 195/65 R15 95H 3 fitments
GenerationI (J87) 2013–2020
MarketEurope
Power89 hp
EngineK9K I4, Diesel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 95H15x5.5 ET40 4x1002.1TiresRims
205/60 R16 92H16x6.5 ET40 4x1002.1TiresRims
205/55 R17 91V17x6.5 ET40 4x1002.1TiresRims

Captur 1.5 dCi

109 hp · 1.5L K9K I4 195/65 R15 95H 3 fitments
GenerationI (J87) 2013–2020
MarketEurope
Power109 hp
Engine1.5L K9K I4, Diesel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 95H15x5.5 ET40 4x1002.1TiresRims
205/60 R16 92H16x6.5 ET40 4x1002.1TiresRims
205/55 R17 95V17x6.5 ET40 4x1002.1TiresRims

Captur 1.6

116 hp · 1.6L I4 195/65 R15 91H 3 fitments
GenerationI (J87) 2013–2020
MarketMiddle East
Power116 hp
Engine1.6L I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x5.5 ET40 4x1002.1TiresRims
205/60 R16 92H16x6.5 ET40 4x1002.1TiresRims
205/55 R17 91H17x6.5 ET40 4x1002.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.