Skip to content

2013 Renault Dokker tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Renault Dokker.

2013 Renault Dokker tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Renault Dokker I

2012 – 2021 Europe market 3 trims

Dokker 1.2 TCe

114 hp · 1.2L H5Ft I4 185/70 R14 92T 4 fitments
GenerationI 2012–2021
Power114 hp
Engine1.2L H5Ft I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 92T14x5.5 ET40 4x1002.9TiresRims
185/65 R15 92T15x6 ET40 4x1002.9TiresRims
195/55 R16 91T16x6 ET40 4x1002.9TiresRims
205/55 R16 91H16x6.5 ET44 4x1002.9TiresRims

Dokker 1.5 dCi

89 hp · 1.5L K9K I4 185/70 R14 92T 4 fitments
GenerationI 2012–2021
Power89 hp
Engine1.5L K9K I4, Diesel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 92T14x5.5 ET40 4x1002.9TiresRims
185/65 R15 92T15x6 ET40 4x1002.9TiresRims
185/60 R16 86T16x6 ET40 4x1002.9TiresRims
205/55 R16 94T16x6 ET40 4x1002.9TiresRims

Dokker 1.6

84 hp · 1.6L K7M I4 185/70 R14 92T 4 fitments
GenerationI 2012–2021
Power84 hp
Engine1.6L K7M I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 92T14x5.5 ET40 4x1002.9TiresRims
185/65 R15 92T15x6 ET40 4x1002.9TiresRims
185/60 R16 86T16x6 ET40 4x1002.9TiresRims
205/55 R16 94T16x6 ET40 4x1002.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.