Skip to content

2019 Renault Grand Scenic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Renault Grand Scenic.

2019 Renault Grand Scenic tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Renault Grand Scenic IV (R9)

2016 – 2020 Europe market 5 trims

Grand Scenic 1.3 TCe

114 hp · 1.3L H5Ht I4 195/55 R20 95H 1 fitment
GenerationIV (R9) 2016–2020
Power114 hp
Engine1.3L H5Ht I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R20 95H20x6.5 ET33 5x114.3–TiresRims

Grand Scenic 1.3 TCe

158 hp · 1.3L H5Ht I4 195/55 R20 95H 1 fitment
GenerationIV (R9) 2016–2020
Power158 hp
Engine1.3L H5Ht I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R20 95H20x6.5 ET33 5x114.3–TiresRims

Grand Scenic 1.3 TCe

138 hp · 1.3L H5Ht I4 195/55 R20 95H 1 fitment
GenerationIV (R9) 2016–2020
Power138 hp
Engine1.3L H5Ht I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R20 95H20x6.5 ET33 5x114.3–TiresRims

Grand Scenic 1.7 dCi

118 hp · 1.7L R9N I4 195/55 R20 95H 1 fitment
GenerationIV (R9) 2016–2020
Power118 hp
Engine1.7L R9N I4, Diesel
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R20 95H20x6.5 ET33 5x114.3–TiresRims

Grand Scenic 1.7 dCi

148 hp · 1.7L R9N I4 195/55 R20 95H 1 fitment
GenerationIV (R9) 2016–2020
Power148 hp
Engine1.7L R9N I4, Diesel
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R20 95H20x6.5 ET33 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.