Skip to content

2019 Renault Kaptur tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Renault Kaptur.

2019 Renault Kaptur tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Renault Kaptur HA

2016 – 2021 Europe market 2 trims

Kaptur 1.6

113 hp · 1.6L H4M I4 215/65 R16 98T 4 fitments
GenerationHA 2016–2021
Power113 hp
Engine1.6L H4M I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98T16x6.5 ET50 5x114.329TiresRims
215/60 R17 96H17x6.5 ET50 5x114.329TiresRims
235/60 R16 100H16x7 ET48 5x114.329TiresRims
235/55 R17 99H17x7.5 ET48 5x114.332TiresRims

Kaptur 2.0

141 hp · 2.0L F4R I4 215/65 R16 98T 4 fitments
GenerationHA 2016–2021
Power141 hp
Engine2.0L F4R I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98T16x6.5 ET50 5x114.329TiresRims
215/60 R17 96H17x6.5 ET50 5x114.329TiresRims
235/55 R17 99H17x7 ET48 5x114.332TiresRims
235/50 R18 97V18x7.5 ET48 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.