Skip to content

2018 Renault Latitude tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Renault Latitude.

Bolt pattern
Fitment tables

2 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear.

Renault Latitude L70

2010 – 2018 2 trims

Latitude 2.0i

138 hp · MR20 I4 205/60 R16 92H 6 fitments
GenerationL70 2010–2018
Power138 hp
EngineMR20 I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92H16x7 ET47 5x114.32TiresRims
215/55 R16 93V16x7 ET47 5x114.32TiresRims
215/60 R16 95V16x7 ET47 5x114.32TiresRims
215/55 R17 94V17x7 ET47 5x114.32TiresRims
215/50 R17 95V17x7 ET47 5x114.32TiresRims
225/50 R17 97V17x7.5 ET47 5x114.32.2TiresRims

Latitude 2.5i

174 hp · VQ25 V6 215/55 R16 93V 6 fitments
GenerationL70 2010–2018
Power174 hp
EngineVQ25 V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R16 93V16x7 ET47 5x114.32TiresRims
215/60 R16 95V16x7 ET47 5x114.32TiresRims
215/55 R17 94V17x7 ET47 5x114.32TiresRims
215/50 ZR17 95W17x7 ET47 5x114.32TiresRims
225/50 ZR17 97W17x7 ET47 5x114.32TiresRims
225/45 ZR18 95W18x7.5 ET47 5x114.32.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.