Skip to content

1999 Renault Lutecia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Renault Lutecia.

Fitment tables

2 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Renault Lutecia II (BB/CB)

1998 – 2005 Japan market 2 trims

Lutecia 1.6i (GF-BK4M)

109 hp · K4M I4 175/65 R14 82T 6 fitments
GenerationII (BB/CB) 1998–2005
Power109 hp
EngineK4M I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET36 4x1002TiresRims
185/60 R14 82H14x5.5 ET36 4x1002TiresRims
185/55 R15 82H15x6 ET36 4x1002TiresRims
195/50 R15 82V15x6 ET43 4x1002.1TiresRims
195/45 R16 81V16x6.5 ET43 4x1002.1TiresRims
205/45 R16 83V16x7 ET43 4x1002.1TiresRims

Lutecia 1.6i (GF-BK7M)

89 hp · K7M I4 165/65 R14 79T 6 fitments
GenerationII (BB/CB) 1998–2005
Power89 hp
EngineK7M I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79T14x5 ET36 4x1002TiresRims
175/65 R14 82T14x5 ET36 4x1002TiresRims
175/60 R14 79H14x5 ET36 4x1002TiresRims
185/60 R14 82H14x5.5 ET36 4x1002TiresRims
185/55 R15 82V15x6 ET43 4x1002.1TiresRims
195/45 R16 81V16x6.5 ET43 4x1002.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.