Skip to content

2017 Renault Lutecia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Renault Lutecia.

2017 Renault Lutecia tire sizes

Bolt patterns
4x100
IV (BH)
5x114.3
IV (BH)
Fitment tables

4 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear.

Renault Lutecia IV (BH)

2013 – 2020 Japan market 4 trims

Lutecia 0.9 TCe (ABA-RH4B)

89 hp · 0.9L H4Bt I3 195/55 R16 87H 2 fitments
GenerationIV (BH) 2013–2020
Power89 hp
Engine0.9L H4Bt I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R16 87H16x6.5 ET44 4x1002TiresRims
205/45 R17 88V17x7 ET44 4x1002.1TiresRims

Lutecia 1.2 TCe (ABA-RH5F1)

117 hp · 1.2L H5Ft I4 195/55 R16 87H 2 fitments
GenerationIV (BH) 2013–2020
Power117 hp
Engine1.2L H5Ft I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R16 87H16x6.5 ET44 4x1002TiresRims
205/45 R17 88V17x7 ET44 4x1002.1TiresRims

Lutecia 1.6 TCe (ABA-RM5M)

197 hp · 1.6L M5M I4 205/40 ZR18 86Y 2 fitments
GenerationIV (BH) 2013–2020
Power197 hp
Engine1.6L M5M I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/40 ZR18 86Y18x7.5 ET55 5x114.32.2TiresRims
215/35 ZR18 85Y18x7.5 ET48 5x114.32.3TiresRims

Lutecia 1.6 TCe (ABA-RM5M1)

217 hp · 1.6L M5M I4 205/40 ZR18 86Y 2 fitments
GenerationIV (BH) 2013–2020
Power217 hp
Engine1.6L M5M I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/40 ZR18 86Y18x7.5 ET55 5x114.32.2TiresRims
225/35 ZR18 86Y18x8 ET48 5x114.32.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.