Skip to content

2002 Renault Master tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Renault Master.

Fitment tables

4 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Renault Master II (FD/JD)

1998 – 2003 Europe market 4 trims

Master 1.9 dCi

80 hp · 1.9L F9Q I4 195/70 SR15 4 fitments
GenerationII (FD/JD) 1998–2003
Power80 hp
Engine1.9L F9Q I4, Diesel
Center bore89.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 SR1515x6 ET66 5x13055TiresRims
215/70 SR1515x6 ET66 5x13055TiresRims
195/65 SR1616x6 ET66 5x13055TiresRims
215/65 SR1616x6 ET66 5x13055TiresRims

Master 2.2 dCi

89 hp · 2.2L G9T I4 195/70 SR15 4 fitments
GenerationII (FD/JD) 1998–2003
Power89 hp
Engine2.2L G9T I4, Diesel
Center bore89.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 SR1515x6 ET66 5x13055TiresRims
215/70 SR1515x6 ET66 5x13055TiresRims
195/65 SR1616x6 ET66 5x13055TiresRims
215/65 SR1616x6 ET66 5x13055TiresRims

Master 2.5 dCi

113 hp · 2.5L G9U I4 215/65 SR16 4 fitments
GenerationII (FD/JD) 1998–2003
Power113 hp
Engine2.5L G9U I4, Diesel
Center bore89.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 SR1616x6 ET66 5x13055TiresRims
205/75 SR1616x6 ET66 5x13059TiresRims
225/65 SR1616x6 ET66 5x13055TiresRims
225/60 SR1717x6.5 ET58 5x13055TiresRims

Master 3.0 dCi

134 hp · 3.0L ZD3 I4 215/65 SR16 4 fitments
GenerationII (FD/JD) 1998–2003
Power134 hp
Engine3.0L ZD3 I4, Diesel
Center bore89.1 mm
PCD5x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 SR1616x6 ET66 5x13055TiresRims
205/75 SR1616x6 ET66 5x13059TiresRims
225/65 SR1616x6 ET66 5x13055TiresRims
225/60 HR1717x6.5 ET58 5x13055TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.