Skip to content

2025 Renault Master tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Renault Master.

2025 Renault Master tire sizes

Bolt patterns
6x200
III (FV/JV) Facelift
5x130
III (FV/JV) Facelift
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Renault Master III (FV/JV) Facelift

2019 – 2025 Europe market 2 trims

Master 2.3 dCi (Van)

162 hp · 2.3 L M9T I4 Diesel 2.3 L M9T I4 195/75 R16 2 fitments
GenerationIII (FV/JV) Facelift 2019–2025
MarketEurope
Power162 hp
Engine2.3 L M9T I4 Diesel 2.3 L M9T I4, Diesel
Center bore142.1 mm
PCD6x200
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/75 R1616x5.5 ET117 6x20061TiresRims
OE225/65 R1616x6.5 ET66 5x130TiresRims

Master ZE (Van)

76 hp · Electric 215/65 R16 2 fitments
GenerationIII (FV/JV) Facelift 2019–2025
MarketMexico
Power76 hp
EngineElectric, Electric
Center bore89.1 mm
PCD5x130
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1616x6.5 ET66 5x13049 F / 52 RTiresRims
OE225/65 R1616x6.5 ET66 5x130TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.