2009 Renault Safrane tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Renault Safrane.

2009 Renault Safrane tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2010 Middle East market 2 trims

137 hp · MR20DE I4 195/60 R16 89H 5 fitments

GenerationII (A34) 2008–2010

Power137 hp

EngineMR20DE I4, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R16 89H	16x6.5 ET47 ~~5x114.3~~	2	Tires Rims
205/60 R16 92H	16x7 ET47 ~~5x114.3~~	2	Tires Rims
215/60 R16 95V	16x7 ET47 ~~5x114.3~~	2	Tires Rims
215/55 R17 94V	17x7 ET47 ~~5x114.3~~	2	Tires Rims
225/50 ZR17 93W	17x7 ET47 ~~5x114.3~~	2.1	Tires Rims

170 hp · VQ23DE V6 205/60 R16 92H 5 fitments

GenerationII (A34) 2008–2010

Power170 hp

EngineVQ23DE V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92H	16x7 ET47 ~~5x114.3~~	2	Tires Rims
215/60 R16 95V	16x7 ET47 ~~5x114.3~~	2	Tires Rims
215/55 R17 94V	17x7 ET47 ~~5x114.3~~	2	Tires Rims
225/50 ZR17 93W	17x7 ET47 ~~5x114.3~~	2.1	Tires Rims
225/45 ZR18 92W	18x7.5 ET50 ~~5x114.3~~	2.1	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.