Skip to content

2023 Renault Sandero tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Renault Sandero.

Bolt pattern

2 generations were sold in 2023. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Renault Sandero II (B52) Facelift

2022 – 2024 1 trim

Sandero 1.0 SCe (Hatchback, 5d)

80 hp · 1.0 L D4D I4 Petrol + E85 1.0 L D4D I4 Petrol + E85 185/65 R15 5 fitments
GenerationII (B52) Facelift 2022–2024
MarketLatin America
Power80 hp
Engine1.0 L D4D I4 Petrol + E85 1.0 L D4D I4 Petrol + E85
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x6 ET40 4x10032 F / 29 RTiresRims
Alt185/70 R1414x5.5 ET43 4x10032 F / 29 RTiresRims
Alt195/60 R1515x6 ET40 4x10032 F / 29 RTiresRims
Alt185/60 R1616x6 ET43 4x10032 F / 29 RTiresRims
Alt195/55 R1616x6 ET43 4x10032 F / 29 RTiresRims

Renault Sandero II (B8) Facelift

2019 – 2026 1 trim

Sandero 1.6 SCe (Hatchback, 5d)

110 hp · 1.6 L H4M I4 Petrol 1.6 L H4M I4 185/65 R15 5 fitments
GenerationII (B8) Facelift 2019–2026
MarketLatin America
Power110 hp
Engine1.6 L H4M I4 Petrol 1.6 L H4M I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x6 ET40 4x10032 F / 29 RTiresRims
OE195/55 R1616x6 ET43 4x10032 F / 29 RTiresRims
OE195/60 R1616x6 ET43 4x10032 F / 29 RTiresRims
Alt205/55 R1616x6 ET43 4x10032 F / 29 RTiresRims
Alt205/55 R1616x6.5 ET40 4x10032 F / 29 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.