Skip to content

1997 Renault Twingo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Renault Twingo.

1997 Renault Twingo tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Renault Twingo I (C06)

1992 – 2007 Europe market 2 trims

Twingo 1.15i

58 hp · 1.15L D7F I4 145/80 R13 78S 4 fitments
GenerationI (C06) 1992–2007
Power58 hp
Engine1.15L D7F I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 78S13x4.5 ET36 4x1002TiresRims
155/70 R13 75T13x4.5 ET36 4x1002TiresRims
155/65 R14 73T14x5.5 ET36 4x1002TiresRims
165/55 R15 73H15x5.5 ET43 4x1002.1TiresRims

Twingo 1.2i

54 hp · 1.2L C3G I4 145/80 R13 78S 4 fitments
GenerationI (C06) 1992–2007
Power54 hp
Engine1.2L C3G I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R13 78S13x4.5 ET36 4x1002TiresRims
155/70 R13 75T13x4.5 ET36 4x1002TiresRims
155/65 R14 73T14x5.5 ET36 4x1002TiresRims
165/55 R15 73H15x5.5 ET43 4x1002.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.