Skip to content

2024 Roewe iMAX8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Roewe iMAX8.

2024 Roewe iMAX8 tire sizes

Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Roewe iMAX8 iMAX8

2020 – 2027 3 trims

iMAX8 1.5T HEV

384 hp · 1.5 L I4 Hybrid 1.5 L I4 225/60 R18 / 225/60 R18 1 fitment
GenerationiMAX8 2020–2027
MarketChina
Power384 hp
Engine1.5 L I4 Hybrid 1.5 L I4, Hybrid
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/60 R1818x –TiresRims
Rear225/60 R18 –Tires

iMAX8 2.0T

231 hp · 2.0 L I4 Petrol 2.0 L I4 225/55 R18 / 225/55 R18 1 fitment
GenerationiMAX8 2020–2027
MarketChina
Power231 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/55 R1818x –TiresRims
Rear225/55 R18 –Tires

iMAX8 EV

241 hp · Electric 225/60 R18 / 225/60 R18 1 fitment
GenerationiMAX8 2020–2027
MarketChina
Power241 hp
EngineElectric, Electric
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/60 R1818x –TiresRims
Rear225/60 R18 –Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.