2011 Rolls-Royce Phantom tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Rolls-Royce Phantom.

2011 Rolls-Royce Phantom tire sizes

255/50R21 285/45R21

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2002 – 2016 1 trim

453 hp · 6.75L V12 255/50 ZR21 106W / 285/45 ZR21 109W 1 fitment

GenerationVII 2002–2016

Power453 hp

Engine6.75L V12, Petrol

Center bore72.6 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front255/50 ZR21 106W	21x8 ET30 ~~5x120~~	35	Tires Rims
Rear285/45 ZR21 109W	21x9.5 ET30 ~~5x120~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.