1998 Rover 100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Rover 100.

1998 Rover 100 tire sizes

155/65R13 185/55R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1998 3 trims

59 hp · I4 155/65 R13 73T 2 fitments

Generation100 1994–1998

Power59 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73T	13x4.5 ET52 ~~4x95.25~~	30	Tires Rims
185/55 R13 77H	13x5.5 ET52 ~~4x95.25~~	29	Tires Rims

74 hp · I4 155/65 R13 73T 2 fitments

Generation100 1994–1998

Power74 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73T	13x4.5 ET52 ~~4x95.25~~	30	Tires Rims
185/55 R13 77H	13x5.5 ET52 ~~4x95.25~~	29	Tires Rims

56 hp · I4 155/65 R13 73T 2 fitments

Generation100 1994–1998

Power56 hp

EngineI4, Diesel

Center bore57.1 mm

PCD4x95.25

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73T	13x4.5 ET52 ~~4x95.25~~	30	Tires Rims
185/55 R13 77H	13x5.5 ET52 ~~4x95.25~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.