1999 Rover 25 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1999 trim.

Tires for the 1999 Rover 25

Sizes most trims come with first. Open your trim below for its exact size.

175/65R14 Best-rated standard on 4 trims

Check price on Amazon · 175/65R14
175/70R14 Best-rated optional on 4 trims

Check price on Amazon · 175/70R14
185/65R14 Best-rated optional on 4 trims

Check price on Amazon · 185/65R14

Also listed: 185/55R15 195/55R15 205/50R16 205/45R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1999: 4
Generation: 25
Other years: 1999
2000
2001
2002
2003
2004
2005
All years (1999–2005)

4 trims sold in 1999

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Rover 25 25

1999–2004 4 trims

25 1.4i +3 variants 102 hp · I4 175/65R14 82T 8 fitments

Same tires and wheels on: 1.6i, 1.8i, 2.0 iDT

Generation: 25 · 1999–2004
Power: 102 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 175/65R14 Wheels 14x5.5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/65R14 82T	Rim 14x5.5 ET45 ~~4x100~~	30 psi
175/65R14 82H	Rim 14x5 ET45 ~~4x100~~	30 psi
175/70R14 84T	Rim 14x5.5 ET45 ~~4x100~~	30 psi
185/65R14 86H	Rim 14x5.5 ET45 ~~4x100~~	30 psi
185/55R15 82V	Rim 15x6 ET45 ~~4x100~~	30 psi
195/55R15 85H	Rim 15x6 ET45 ~~4x100~~	30 psi
205/50R16 87H	Rim 16x6.5 ET45 ~~4x100~~	28 psi
205/45R17 84H	Rim 17x7 ET45 ~~4x100~~	28 psi

How to read 82T: 82 is the load index (up to 1,047 lb / 475 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.