Skip to content

2000 Saturn L-Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Saturn L-Series.

Fitment tables

2 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Saturn L-Series I

2000 – 2005 USA market 2 trims

L-Series 2.2i

138 hp · I4 195/65 R15 89T 5 fitments
GenerationI 2000–2005
Power138 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 89T15x6 ET37 5x11033TiresRims
205/65 R15 89T15x6 ET45 5x11033TiresRims
195/60 R16 89T16x6 ET45 5x11033TiresRims
205/55 R16 89H16x6.5 ET45 5x11032TiresRims
205/50 R17 89H17x6.5 ET45 5x11030TiresRims

L-Series 3.0i

207 hp · V6 215/55 R16 91H 5 fitments
GenerationI 2000–2005
Power207 hp
EngineV6, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R16 91H16x6.5 ET49 5x11032TiresRims
215/50 R17 91H17x7 ET45 5x11030TiresRims
225/45 R17 91H17x7.5 ET41 5x11030TiresRims
225/40 R18 91H18x7.5 ET41 5x11030TiresRims
235/35 R19 91H19x8 ET38 5x11030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.