1979 Seat 133 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Seat 133.

1979 Seat 133 tire sizes

145/65R13 155/55R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1974 – 1982 Europe market 3 trims

34 hp · I4 135x R12 3 fitments

GenerationI 1974–1982

Power34 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R12	12x4 ET38 ~~4x98~~	–	Tires Rims
145/65 R13	13x4 ET38 ~~4x98~~	–	Tires Rims
155/55 R14	14x4.5 ET35 ~~4x98~~	–	Tires Rims

44 hp · I4 135x R12 3 fitments

GenerationI 1974–1982

Power44 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R12	12x4 ET38 ~~4x98~~	–	Tires Rims
145/65 R13	13x4 ET38 ~~4x98~~	–	Tires Rims
155/55 R14	14x4.5 ET35 ~~4x98~~	–	Tires Rims

40 hp · I4 135x R12 3 fitments

GenerationI 1974–1982

Power40 hp

EngineI4, Petrol

Center bore57.1 mm

PCD4x98

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
135x R12	12x4 ET38 ~~4x98~~	–	Tires Rims
145/65 R13	13x4 ET38 ~~4x98~~	–	Tires Rims
155/55 R14	14x4.5 ET35 ~~4x98~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.