Skip to content

1999 Seat Arosa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Seat Arosa.

Bolt pattern
Fitment tables

4 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Seat Arosa 6H

1997 – 2000 Europe market 4 trims

Arosa 1.0i

50 hp · ALL AER AHT ANV ALD I4 155/70 R13 75S 4 fitments
Generation6H 1997–2000
Power50 hp
EngineALL AER AHT ANV ALD I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 75S13x4.5 ET35 4x10029TiresRims
175/65 R13 80S13x5.5 ET43 4x10029TiresRims
175/60 R14 79S14x5.5 ET43 4x10029TiresRims
185/55 R14 77S14x5.5 ET43 4x10029TiresRims

Arosa 1.4 TDI

74 hp · AMF I4 175/65 R13 80S 4 fitments
Generation6H 1997–2000
Power74 hp
EngineAMF I4, Diesel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R13 80S13x5.5 ET43 4x10029TiresRims
175/60 R14 77S14x5.5 ET43 4x10029TiresRims
185/55 R14 77S14x6 ET43 4x10029TiresRims
195/45 R15 77H15x6 ET45 4x10030TiresRims

Arosa 1.4i

59 hp · AKV AEX APQ AKK ANW I4 155/70 R13 75S 4 fitments
Generation6H 1997–2000
Power59 hp
EngineAKV AEX APQ AKK ANW I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 75S13x4.5 ET35 4x10029TiresRims
175/65 R13 80S13x5.5 ET43 4x10029TiresRims
185/55 R14 79S14x6 ET43 4x10029TiresRims
195/45 R15 78H15x6 ET45 4x10030TiresRims

Arosa 1.7 SDI

59 hp · AKU I4 175/65 R13 80S 4 fitments
Generation6H 1997–2000
Power59 hp
EngineAKU I4, Diesel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R13 80S13x5.5 ET43 4x10029TiresRims
175/60 R14 78S14x5.5 ET43 4x10029TiresRims
185/55 R14 78S14x6 ET43 4x10029TiresRims
195/45 R15 78S15x6 ET45 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.